24 Cause Damage to Computer and How to Overcome It

This time we will Summarizes "25 Problems and constraints which tend Computer Users Face and How to
Prevent". langsong okay we all First Section:


1. Computer No More Living
How to Overcome It:
- Check cable connection (from the power outlet to the power button on PC)
- Check whether the stabilizer function or tdak (if using the stabilizer)
- Check the power cable on the CPU
- If you still do not want to live permasalahanya may lie in the power supply or MB

2. Computer Life But Not Mau Mau Booting
How to Overcome It:
Recognize First Beep Beep:
Beep 1 time only sign that the condition of both computer
Beep 1 time, long-There are problems in memory
Beep 1 time and 3 times the short-term damage on the VGA card
Beep 1 time 2 times the short-term and Damage in DRAM parity
Beep continuously Damage dimodul memory or video memory
- Check by using software such as SiSoft Sandra dianosa, PC mark04, mark05 PC etc.

3. Want Computer Boot But Always "Safe Mode" (to go into safe mode press F8)
How to Overcome It:
- Restart your computer
- If still trouble you intall windows again
- If it is still safe mode as well, means the HD is in trouble
check with: scan disk

4. Computer Hangs Frequently
How to Overcome It
- Due to software crashes
- Press ctrl + alt + del>> click End Task on the program "Not Responding"
- Press the restart button on the CPU
- Due to a hardware conflict (the addition of new hardware)
- Conflicts between hardware common in Windows operating systems
- Re-install your windows, but keep in mind before you reinstall windows, first remove your new hardware
- Alankan facility "add new" hardware contained on the control panel.

5. Keyboard is not recognized by Computer
How to Overcome It
- Check if your keyboard is plugged in correctly
- If it already but still the keyboard is not detected then chances are your keyboard problem.
- Try to replace your keyboard, if it has been replaced but the problem persists then it is most likely damaged in the keyboard port on your MB.
- If it's in a New Keyboard Replace but remain undetected Also Try Replace with USB keyboards and if not detected also means there is something wrong in the Windows system Buddies

6 Mouse is not recognized by the computer (the same case denagn keyboard)

7. Mouse Pointer Always Hop-Skip
How to Overcome It
- Clean up immediately on the dirty mouse (especially on the ball mouse)

8. Computer Crash Often
How to Overcome It:
- Check all the cable position, hardware, and also the voltage on the chassis, check the temperature on the CPU and likewise check ram, processor and vga.

9. When Manufacturers MetherBoard (MB) Unknown
How to Overcome It:
- Open the casing, and check your CPU is usually a MB has a label manufacturer that also contains the specification of the type Mbnya.
- Look in the manual book
- Find a Mb of data via the Internet, match the ID printed on the sticker board primarily to a list contained on the site www.fcc.gov / oet / fccid, and find a list of ID numbers issued by the licensing agency for electronic devices in the United
- Use analysis software, such as sandra99 etc..

10. Forgot BIOS Password
How to Overcome It:
- Unplug the cpu cmos batterey
- Or by emncoba bberapa guess the default password for some manufacturers eg AMI and AWARD bios (eg, AMI, AMI, AMI_SW, ALLY, 589 589 etc.)

11. Clock and setting the date of the BIOS-Fox Always Changing
How to Overcome It:
- Batteray cmos is not working (dead), replace with a new batteray

12. Adding New Hardware Device, Tp Not Detected by BIOS
How to Overcome It:
- Most likely your bios is outdated so it can not detect new hardware, then immediately update your bios (can be downloaded via the internet, eg: www.windrivers.com)

13. Keep track of Damage Card In MB
How to Overcome It:
- Try denganmencabut and stick a few cards on the MB you
- If the boot is successful then your card is not problematic so nevertheless on the contrary

14. New Processor Plug Tp Not Detected
How to Overcome It:
- Check whether you have installed the processor correctly denan
- Check whether the position of the jumpers on the processor are correct (about the jumpers on the processor you can Check this in the manual booknya)

15. Crash After Installing New RAM
How to Overcome It:
- The possibility of ram that you attach is not compatible with your computer (unplug the ram)

16. Adding RAM But Not Detected
How to Overcome It:
- Make a check as when the previous case
- Make sure the slot is used in accordance yan, for example: SD RAM has a slot similar to RAM but RD RD RAM, can not be detected although it could be mounted on the slot type of SD RAM.

17. After Adding RAM Computer manjadi The Slow Process
How to Overcome It:
- Note the limit of your ram capacity, such as type of EDO ram maximum limit is 64 MB, then when forced to add it to your computer become slow

18. Virtual Ram
How to Overcome It:
- Right-click My Computer icon, select properties, then select the Performance tab and click on VIRTUAL MEMORY
- Select an item let me specify my own virtual memory settings (select the HD to be used as virtual memory)
- Bell-shaped OK

19. Monitors Do Not Want Nyala
How to Overcome It:
- Make sure all power cables and connectors associated with the monitor is ok
- Make sure also that there are pins on the VGA port entrance with sempuran none are bent, if not go all / one to pin VGA port
- Make sure your VGA card is also ok

20. Currently Being Dark Monitor Loading Windows
How to Overcome It:
- Possibly because the drivers for the monitor setup is not appropriate (frequency setting is too high)
- First entry into a state of safe mode (press F8)
- Re-install drivers VGAnya

21. Display Suddenly manjadi Damage And Computer Hang
How to Overcome It:
- Due to the temperature (at the VA card) very hot

22. Display monitor size Desire Not Available
How to Overcome It:
- Go to display properties (click kana semabrang places select properties)
- Press the settings tab and adjust the display size and liking (on screean area)

23. Monitor Blinks When Used As
How to Overcome It:
- Go to display properties (click kana semabrang places select properties)
- Press the settings tab and click advanced, then click the adapter, this section of the display refresh raet the dininkan

24. New Sound Card Not Detected
How to Overcome It:
- Crash with the old card saounda
- Check the manual booknya, whether the soundcard on boardnya need to be switched off or not if you want to re-install a new soundcard yan (usually disabled through jumper or bios)

May be useful for you who happen to have the same problem.